Hydraulic Power Hacksaw Machines


Hydraulic Power Hacksaw Machines

Brand Hydraulic Control Hacksaw Machine has been designed to cut quickly and accurately all material from nickel chrome steel to plastic, controls are simple and easy, An automatic cut out operates at the completion of the operation and the bow slide returns to the top position, the machine has attractive appearance.

Bed: The bed is of rigid casting with a wide through for collection of coolant, swarf and also houses the V-belts device, bed is single piece casting

Saw Frame: The saw frame is of rigid construction and runs in prismatic guide ensuring a square and parallel cut and this cut takes place on the forward on the backward pull stroke, The blade is hydraulically lifted out of contract with work place on the forward stroke to prevent wear of the blade.

The drive: The drive is given to the machine through V-pullys with provision to adjust fully the tension of the V-belts. The shafts are fitted with taper and ball bearings which eliminate friction.

Speed: Two speeds has been provided in order to make it suitable for all metals. High speed for metals like mild steel, brass, copper etc and low speed for cast iron

Feed saw: Feed saw is controlled hydraulically by two levers provided at the dash-pot. One controls the rate of feed, while the other enables the bow slide to be raised or lowered and the motor gets switched off on completion of the cut.

Vice: The vice is rigid construction. The one jaw remains fixed while other can be adjusted according to the size of the material to be cut.

Coolant: The coolant tank is totally enclosed in the machine base with a constant speed pump which continuously supplies coolant to the saw blade

Electricals: Push button starter is fitted with an adjustable trip mechanism which stops the machine soon after the blade is clear from the work at extra cost.

Technical Specifications

Model M-175 M-200 M-250 M-300 M-350 M-400 M-500 M-600
Cap. Of Round bar 175 200 250 300 350 400 500 600
Cap.of square bar 125 150 200 250 275 325 350 425
Stroke 135 135 140 140 140 135 150 150
Strokes per min (Approx) 100-120 100-120 85-100 85-100 85-100 70-85 70-85 70-85
Blade Size 12-14 14-16 16-18 18-20 20-22 18-24 24-32 30-36
Electric Motor 1 H.P 1 H.P 2 H.P 2 H.P 2 H.P 3 H.P 5 H.P 5 H.P
RPM of motor 1440 1440 1440 1440 1440 1440 960 960
Length 1000 1000 1150 1250 1300 1500 1650 1750
Width 600 600 625 650 650 675 700 725
Height 800 800 1000 1000 1100 1200 1300 1400
Weight (Approx) 325 kg 335 kg 450 kg 550 kg 650 kg 750 kg 1100 kg 1200 kg
Weight with packing 400 kg 450 kg 550 kg 650 kg 775 kg 900 kg 1300 kg 1400 kg
V-Belts required 4 pcs 4 pcs 4 pcs 4 pcs 4 pcs 5 pcs 6 pcs 6 pcs

Standard Accessories: Mechanical coolant pump, Motor pully, Starter plate, length guage belts guards, Flexible coolant pipe

Extra Accessories: V-belts, Blade, Hydraulic oil, Bar stand, Motor, Starter, Electrical Wiring, Three speed gear box

Note: All specifications are subject to change with out prior notice.


Enquiry